10/100M Fiber Ethernet Media Converter With 4 RJ45 Ports & 1 Fiber Port

10/100M Fiber Ethernet Media Converter

With 4 RJ45 Ports & 1 Fiber Port

1. Overview

The 10/100M Fiber Ethernet Media Converter series is designed to meet the massive needs for network deployment and able to extend a copper based Fast network via fiber cable to a maximum distance up to 120KM.

Our 10/100M Fiber Ethernet Media Converter series is fully compliant with IEEE802.3, IEEE802.3U, 10/100Base-TX, 100Base-FX, standards. The installation & operation procedures are simple & straightforward. Operation status can be locally monitored through a set of Diagnostic LED lamps.

Features 

• 5 ports 10/100M ethernet switch with built in transceivers and memory;
• Build in SRAM for frame buffer;
• Build in storage of 1K MAC address;
• Compliance with IEEE802.3, 802.3u, 802.3x standard;
• Compliance CSMA/CD Protocol;
• Converter twisted-pair cable to 100Base-Fx fiber;
• Support 10/100Mbps auto-negotiation for RJ45 ports;
• Support auto MDI/MDI-X function for RJ45 ports;;
• Passed maximum frame size 1536 bytes;
• Broadcast storm protection;

11) Fiber Port SC/PC (single/multi-mode ),the transmission distance can up to 120Km.

RJ45 Port: 100m for 100Base-Tx UTP Cat.5 cable.

12) Inside power: AC 220/110V

13) Power Consume: < 5W.

2. Installation

• Attach fiber cable from the media converter to the fiber network. The fiber connections must be matched – transmit socket to receive socket, the TX ,RX fiber cable must be paired at both ends .

• Attach a UTP cable from the 10/100BASE-T network to the RJ-45 ports on the media converter.

• Connect the power adapter to the media converter and check that the Power LED lights up. The LINK/ACT LEDs will light up when all the cable connections are satisfactory.